AI-GPS-W-M2

GPS Master and Slave Clocks for Cleanrooms

No items found.
AI-GPS-W-M2 GPS master clock
GPS Synchronized Clocks

GPS Master and Slave Clocks for Cleanrooms

One GPS master, many clocks, one time. Super bright LED clocks in 2.5 inch or 4 inch, customized to your requirements, that take their time from GPS and pass it to every room over RS-485, wireless RF, or Ethernet with PoE.

GPS Time Wired RS-485 Wireless RF Ethernet with PoE
GPS Synchronized Digital Clocks: the AI-GPS-W-M2 GPS master clock, the AI-CL2-S slave clock (HH:MM:SS) and the AI-CL2-S1 slave clock (HH:MM)
500 msGPS time accuracy at the master
2.5 or 4 inchSuper bright red LED digits
255 slavesPer master on wireless RF mesh
1.2 kmSlave range from the master
Product Overview

Set up one clock. Every other clock follows it.

These GPS synchronized clocks are made for pharmaceutical cleanrooms and other industrial cleanroom production areas, where every room needs to show the same time. A GPS master clock takes the satellite time of the country of use, to an accuracy of 500 milliseconds, and sends it to slave clocks across the facility. Instead of setting each clock by hand, you set up one master and the slaves follow it.

We customize the clocks to your requirements. You can choose a 2.5 inch or a 4 inch display, and the clocks are also available in a date and time format. The standard 2.5 inch series has three models: the AI-GPS-W-M2 master clock, the AI-CL2-S slave clock that shows hours, minutes, and seconds, and the AI-CL2-S1 slave clock that shows hours and minutes. All have a super bright red LED display, wall mounting, and an internal memory battery.

How It Works

Receive, relay, display

The master clock has an active GPS antenna that receives satellite time. It then passes that time to the slave clocks over one of three communication options: wired RS-485, wireless RF, or Ethernet TCP/IP with PoE. Every slave shows the same time as the master. If power is cut or communication fails, the internal memory battery keeps the time, and the slaves run in a built-in high accuracy mode until synchronization returns.

15:22:35MASTER
15:22:35SLAVE
15:22SLAVE

Every clock in the system shows the same time, in HH:MM:SS or HH:MM.

When the GPS Signal or the Network Drops

The clocks keep running

The internal memory battery keeps the time through power cuts. If RS-485 or wireless RF communication fails, the slave clocks run in a high accuracy mode with an annual drift of not more than ±120 seconds, or 2 minutes. In the absence of a GPS signal, the standalone accuracy is also ±120 seconds per year. The time can be reset from the keypad on the circuit board inside the box, or with the optional wireless remote control.

±120 sNO GPS SIGNAL
±120 sNETWORK DOWN

Drift of not more than ±120 seconds, or 2 minutes, per year.

Network Layout

One master, up to 255 slave clocks on a wireless mesh

With wireless RF, the clocks talk to each other at 865 MHz in a mesh network. Slave clocks can be up to 1.2 kilometers from the master clock and still display the same time as the master.

Wireless RF mesh topology. The master clock takes satellite time through its GPS antenna, and the slave clocks follow it.
The Models

Master and slave clocks in the 2.5 inch series

GPS master clock

AI-GPS-W-M2

6 digit, 2.5 inch, 7 segment super bright red LED display. It takes GPS time and passes it to the slave clocks.

Display
6 digit, 2.5 inch
Time format
HH:MM:SS
Slave clock

AI-CL2-S

6 digit, 2.5 inch, 7 segment super bright red LED display. It shows hours, minutes, and seconds, the same as the master.

Display
6 digit, 2.5 inch
Time format
HH:MM:SS
Slave clock

AI-CL2-S1

4 digit, 2.5 inch, 7 segment super bright red LED display. It shows hours and minutes for a cleaner, simpler face.

Display
4 digit, 2.5 inch
Time format
HH:MM
ModelRoleDisplayTime format
AI-GPS-W-M2GPS master clock6 digit, 2.5 inch, 7 segment super bright red LEDHH:MM:SS
AI-CL2-SSlave clock6 digit, 2.5 inch, 7 segment super bright red LEDHH:MM:SS
AI-CL2-S1Slave clock4 digit, 2.5 inch, 7 segment super bright red LEDHH:MM

All three models offer wired RS-485, wireless RF, and Ethernet TCP/IP with PoE communication, wall mounting, and an internal memory battery. The same system can be supplied with 4 inch displays, customized to your requirements.

Customized to Your Requirements

Built around what your project needs

We build the clocks around what your project needs. You can choose the options on the right.

Tell us how many clocks you need, where they will go, and how far away people will read them, and our team will propose the configuration. Talk to our team

Display size
2.5 inch or 4 inch, so the digits match the viewing distance of the room
Display format
Time only, or date and time
Time format
24 hour as standard, or 12 hour on request
Time display
Hours and minutes (HH:MM), or hours, minutes, and seconds (HH:MM:SS)
Communication
Wired RS-485, wireless RF, or Ethernet TCP/IP with PoE
Enclosure
Stainless steel front plate with a powder coated back box, an overall powder coated enclosure, or an overall stainless steel enclosure
Power
24 VDC as standard, with 230 VAC and PoE as options
Features

Built for controlled environments

GPS Time from the Master

The master clock takes satellite time, accurate to 500 milliseconds

Two Display Sizes

2.5 inch or 4 inch, customized to your requirements

Date and Time Format

Available when you want the date as well as the time

Three Ways to Reach the Slaves

Wired RS-485, wireless RF, or Ethernet TCP/IP with PoE

Super Bright LED Display

A red 7 segment display that is easy to read across a room

Choice of Time Format

HH:MM:SS on the master and the AI-CL2-S, HH:MM on the AI-CL2-S1

Memory Battery Backup

Time is kept during power cuts and communication failures

24 or 12 Hour Format

24 hour as standard, 12 hour on request

Three Enclosure Options

Stainless steel front plate with a powder coated back box, an overall powder coated enclosure, or an overall stainless steel enclosure

Wireless Mesh Network

Slaves can be up to 1.2 kilometers from the master

Flexible Power

24 VDC as standard, with 230 VAC and PoE as options

Need something different?

Tell us the size, format, and communication you want, and we will configure it.

Talk to our team
Applications

Where the clocks are used

Pharmaceutical Cleanrooms

Gives every room the same time, so production activities, monitoring entries, and facility records refer to one clock

Industrial Cleanroom Production Areas

Keeps clocks across the production floor on a single time reference, without anyone resetting them

Manufacturing Areas

Gives plants with many departments a uniform time display for shift changes and process timing

Hospitals

Provides a consistent time across wards and theatres, where staff coordinate by the same clock

Choosing the Communication Method

Wired, wireless, or over your network

MethodHow it worksChoose it when
Wired RS-485
One master connects to up to 108 slave clocks over a wired networkYou can run cable, and you want a fixed, permanent installation
Wireless RF
A mesh network at 865 MHz, with up to 255 slave clocks per master and slaves up to 1.2 km from the masterRunning cable is difficult, or the clocks are spread across a large site
Ethernet TCP/IP with PoE
The clocks work on TCP over IP, with power over the same cable, and server time is synchronized across the networkYou already have network cabling and want no separate power supply

The right method depends on the number of clocks, the layout, and the network you have.

The GPS Receiver in the Master Clock

An active antenna that starts quickly

Active antenna, NMEA standard

The master clock has an active GPS antenna with a 3 m cable, and the receiver uses the NMEA standard. It starts quickly: a cold start takes about 45 seconds on average, a warm start about 45 seconds, and a hot start about 2 seconds.

45 sCOLD START
45 sWARM START
2 sHOT START

Place the antenna where it has a clear view of the sky, within reach of the 3 m cable.

The AI-GPS-W-M2 GPS master clock showing 15:22:35, with its antenna and the active GPS antenna on a 3 m cable
The AI-GPS-W-M2 master clock with its active GPS antenna on a 3 m cable.
Mounting and Enclosure Options

Wall mounted, in three finishes

All clocks are wall mounted. The enclosure options are:

1

Stainless Steel Front Plate

Stainless steel front plate with an M.S. powder coated back box

2

Powder Coated

Overall M.S. powder coated enclosure

3

All Stainless Steel

Overall stainless steel enclosure

Specifications

Technical specifications

Parameter
Specification
Models (2.5 inch series)
AI-GPS-W-M2 (GPS master), AI-CL2-S (slave, HH:MM:SS), AI-CL2-S1 (slave, HH:MM)
Display Size
2.5 inch standard series; 4 inch available, customized to requirements
Display Format
Time (HH:MM:SS or HH:MM); date and time format available
Display
Master and AI-CL2-S: 6 digit, 7 segment super bright red LED, 2.5 inch, HH:MM:SS
AI-CL2-S1: 4 digit, 7 segment super bright red LED, 2.5 inch, HH:MM
GPS Receiver of Master
Active antenna, 3 m wire, NMEA protocol
Cold start 45 s (avg), warm start 45 s (avg), hot start 2 s
Communication
Wired RS-485 proprietary protocol for up to 108 clocks
Optional wireless RF at 865 MHz for up to 255 slave clocks in mesh topology
Ethernet TCP/IP with PoE
Wireless Range
Slaves up to 1.2 km (1,200 m) from the master
Accuracy
Master GPS time accurate to 500 ms
Standard GPS accuracy of ±1 second relayed across the network
Without a GPS signal, ±120 seconds per year standalone accuracy
Time Programming
GPS time from the master relayed across the wired or wireless network; keypad on the PCB inside the box, or optional wireless remote control
Time Display
24 hour standard; 12 hour on request
Input Supply
Standard 24 VDC, 1 A for 2.5 inch clocks
Optional 230 VAC single phase, 50/60 Hz
Optional PoE
Battery Backup
Internal memory battery
Dimensions (2.5 inch)
AI-GPS-W-M2 and AI-CL2-S: body 375 x 110 x 40 mm (W x H x D), front plate 425 x 140 mm (W x H)
AI-CL2-S1: body 280 x 120 x 40 mm, front plate 325 x 145 mm
Mounting
Wall mounted
Enclosure
Front stainless steel plate with M.S. powder coated back box; overall M.S. powder coated enclosure and overall stainless steel enclosure available
Maintenance

Light upkeep

Clocks need little attention. Compare a slave with the master as part of routine checks, make sure the GPS antenna still has a clear view of the sky, and follow your quality procedures for checking and resetting clocks after a power or network event. Ask our team about the memory battery and its replacement interval.

Compliance

Supports good time management

Uniform time across a cleanroom facility supports good time management practice. The clocks assist your documentation by making sure that every room shows the same time. They do not create or store records, and they do not replace the time controls of your computerized systems or your validation work.

Ace Instruments manufactures under an ISO 9001:2015 certified quality management system.

FAQs

Frequently asked questions

1. What are GPS Synchronized Digital Clocks?

GPS Synchronized Digital Clocks are digital clocks that receive accurate time information from GPS satellites. They help maintain uniform time across multiple locations within a facility, making them useful for pharmaceutical cleanrooms, manufacturing areas, hospitals, and other environments where consistent time display is important.

2. How do GPS synchronized clocks work?

The GPS master clock receives time information from GPS satellites through an external antenna. It then distributes the synchronized time to connected slave clocks using wired RS-485, wireless RF, or Ethernet TCP/IP communication, depending on the selected configuration.

3. What is the difference between a GPS master clock and a slave clock?

The GPS master clock receives the actual time from GPS satellites and distributes it to the slave clocks. Slave clocks receive the synchronized time from the master clock and display the same time across different areas of the facility.

4. Which models are available in the 2.5 inch GPS clock series?

The product catalogue lists three models:

  • AI-GPS-W-M2: GPS Master Clock with HH:MM:SS display.
  • AI-CL2-S: Slave Clock with HH:MM:SS display.
  • AI-CL2-S1: Slave Clock with HH:MM display.

The appropriate model can be selected depending on whether you need a master clock or a slave display. Clocks with a 4 inch display can also be supplied.

5. What is the advantage of using a master and slave clock system?

A master and slave arrangement helps maintain a common time reference throughout a facility. Instead of setting every clock individually, the master clock synchronizes the connected slave clocks. This makes time management easier across multiple rooms, departments, and production areas.

6. What communication options are available for GPS synchronized clocks?

The clock series supports three communication arrangements:

  • Wired RS-485 communication.
  • Wireless RF communication at 865 MHz.
  • Ethernet TCP/IP communication with Power over Ethernet (PoE) option.

The suitable communication method depends on the number of clocks, installation layout, and available network infrastructure.

7. How many slave clocks can be connected to one master clock?

Up to 108 slave clocks can be connected to one master clock through wired RS-485 communication. With wireless RF communication in a mesh network, up to 255 slave clocks can be connected to one master clock. The supported number for your project depends on the selected configuration, so please confirm it with our team.

8. What is the communication distance between the master and slave clocks?

For wireless RF communication, the catalogue specifies that slave clocks can be installed up to 1.2 kilometres (1,200 metres) from the master clock. Actual communication performance may depend on the installation environment and signal conditions.

9. What happens if the GPS signal is temporarily unavailable?

The clocks use an internal memory battery to maintain time during power interruptions or communication failures. In the absence of GPS synchronization, the specified standalone accuracy is approximately ±120 seconds per year. This helps the clocks continue displaying time until synchronization is restored.

10. How accurate are the GPS synchronized clocks?

The master clock receives GPS time with a specified accuracy of approximately 500 milliseconds. The catalogue specifies standard GPS accuracy of ±1 second when time is relayed across the network. This helps maintain consistent time across connected clocks.

11. What type of display is provided with these clocks?

The standard series features a 2.5 inch high, super bright red LED, seven segment display. The master clock and AI-CL2-S display hours, minutes, and seconds (HH:MM:SS), while the AI-CL2-S1 displays hours and minutes (HH:MM). Clocks with a 4 inch display can also be supplied, and a date and time format is available.

12. Can the clocks display time in 12 hour and 24 hour formats?

Yes. The standard time format is 24 hour display. A 12 hour format can also be provided as an option upon request.

13. Do the GPS synchronized clocks require manual time adjustment?

Under normal operation, manual adjustment is not required because the GPS master clock receives time directly from GPS satellites and synchronizes the connected slave clocks. Time programming is also available through a keypad on the PCB inside the enclosure or an optional wireless remote control.

14. What power supply options are available?

The standard power supply for the 2.5 inch clock series is 24 VDC, 1 A. Optional power arrangements include 230 VAC single phase, 50/60 Hz, and Power over Ethernet (PoE), depending on the selected configuration.

15. What are the mounting and enclosure options?

The clocks are designed for wall mounting. The catalogue lists three enclosure options:

  • Stainless steel front plate with an MS powder coated back box.
  • Overall MS powder coated enclosure.
  • Overall stainless steel enclosure.

These options allow customers to select a suitable finish according to their installation requirements.

16. Are GPS synchronized clocks suitable for pharmaceutical cleanrooms?

Yes. The catalogue specifically identifies pharmaceutical cleanrooms and industrial cleanroom production areas as applications. Maintaining synchronized time across different rooms can support consistent time references for production activities, monitoring records, and facility operations.

17. What should I consider when selecting a GPS clock system for my facility?

Consider the number of clock locations, required display size (2.5 inch or 4 inch), display format (time only, or date and time), communication method, installation distance, power availability, and enclosure preference. You should also decide whether the system requires a GPS master clock with wired or wireless slave clocks, or an Ethernet TCP/IP and PoE arrangement.

18. Can the clocks be customized to our requirements?

Yes. We customize the clocks according to the client’s requirements. You can choose a 2.5 inch or a 4 inch display, time only or date and time format, 24 hour or 12 hour time, the communication method, the enclosure, and the power arrangement. Share your requirements with our team, and they will propose a configuration.

19. Are the clocks available with date and time?

Yes. Besides the time displays, the clocks are available in a date and time format. Tell us the layout you need when you order, so the display can be configured for your project.

20. How can I request a quotation or technical assistance for GPS synchronized clocks?

For assistance with selecting master and slave clocks, display size, communication options, enclosure types, power supply arrangements, and project specific requirements, contact the Cleanroom Monitors team through the contact page.

Please share the number of clock locations, preferred display size and format, communication method, and installation layout to help the technical team recommend a suitable configuration.

Need help choosing?

Tell us how many clocks you need, where they will go, and how far away people will read them, and our team will propose the configuration.

Request a quote

Exceptional Instruments That Surpass Your Technical Expectations

Powerful, customized solutions to suit your unique cleanroom monitoring needs

Discover more
No items found.
Download Specifications

Gain insight into your IAQ solution and know technical specifications

Learn more
Know the capabilities of the latest in cleanroom monitoring technology, watch or download PDF for insight
Check our YoutubeDownload Brochure (PDF)

Exceptional Instruments That Surpass Your Technical Expectations

Powerful, customized solutions to suit your unique cleanroom monitoring needs

Discover more